Manual Punchers

These punches can be mounted in parallel on a common base plate. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.

These punches can be mounted in parallel on a common base plate. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.

Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.

Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.

The ideal machine for punching holes up to Ø 10 mm. Available with punches and dies from Ø 2-10 mm, in 1/10 mm graduations. Non-circular cross-section punches, e.g. square, oval, also available.

Twin punches mounted on a common base plate which contains a millimetre scale for adjusting distance between hole centres. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.

Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations. Non-circular cross-section punches, e.g. square, oval, also available. These punches can be mounted in parallel on a common base plate. Suitable for small batch quantities.

The ideal machine for small batch quantities. The accurate punch-guide system allows the use of oval, square, or other non-circular cross-section tools. A small but effective machine. Standard tools from Ø 2-18 mm, in 1/10 mm graduations.

The ideal machine for small batch quantities. The accurate punch-guide system allows the use of oval, square, or other non-circular cross-section tools. A small but effective machine. Standard tools from Ø 2-18 mm, in 1/10 mm graduations.

The ideal tool for small batch quantities. The accurate punch guide system allows the use of oval, square, or other cross-section tools. A small but effective machine.

The ideal tool for small batch quantities. The accurate punch guide system allows the use of oval, square, or other cross-section tools. A small but effective machine.

The accurate punch guide system allows the use of oval, square, or other cross-section tools.

Cut out corners at 90°.

With stroke length limit stop and return spring. Adaptor with 15 mm Ø location. Handle can be mounted for left or right hand use and the start position adjustable through 360°. Extra column height available.

With stroke length limit stop and return spring. Adaptor with 15 mm Ø location. Handle can be mounted for left or right hand use and the start position adjustable through 360°. Extra column height available.