PUNCHING TOOLS

  • JOGGLER
    61 202
    A useful tool for working car body components. The combined tool can be set for either punching or bending. Available with Ø 4-8 mm punches and dies as standard.
    • Capability in 1 mm
    • standard mild steel
       Ø 8 mm
    • Throat depth
    • (punching)
       8 mm
    • Jaw width
       22 mm
    • Overall width
       110 mm
    • Bending depth
       13 mm
    • Overall length
       290 mm
    • Weight
       1.2 kg
  • PUNCHING TOOL SENIOR
    11 101
    Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1.5 mm
    • standard mild steel
       Ø 8 mm
    • Throat depth
        40 mm
    • Overall length
       320 mm
    • Weight
       1.8 kg
  • PUNCHING TOOL JUNIOR
    21 101
    Available with punches and dies from Ø 2-5 mm, in 1/10 mm graduations.
    • Capability in 1.5 mm
    • standard mild steel
      Ø 5 mm
    • Throat depth
       30 mm
    • Overall length
      250 mm
    • Weight
      1 kg
  • HAND PUNCH JUNIOR
    B 31 101
    Available with punches and dies from Ø 2-5 mm, in 1/10 mm graduations.  
    • Capability in 1 mm
    • standard mild steel
      Ø 5 mm
    • Throat depth
       20 mm
    • Overall length
      200 mm
    • Weight
      0.8 kg
  • PUNCHING TOOL OVER FLANGES
    61 502
    For punching of guards. Can be supplied with punches and dies from Ø 4-8 mm.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
       30 mm
    • Overall width
      85 mm
    • Overall length
       300 mm
    • Weight
      1.2 kg
  • PUNCHING TOOL FOR NUMBER PLATES - EXTRA THROAT
    TN 11 102-1
    Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1.25 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
       60 mm
    • Overall length
       330 mm
    • Weight
      2 kg
  • PUNCHING TOOL WITH RETURN SPRING
    61 403
    Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
       15 mm
    • Overall length
       290 mm
    • Weight
      1.2 kg
  • PUNCHING TOOL DOUBLE PUNCH
    63 704
    A combined tool which can accept two punches of different diameters. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
       15 mm
    • Overall length
       315 mm
    • Weight
      1.4 kg
  • SLOT PUNCH
    11 101A
    Punching tool for oval holes 5 x 12 mm, 6 x 12 mm and 8 x 12 mm as standard.
    • Max. mild steel
      1.5 mm
    • Throat depth
       30 mm
    • Overall length
       430 mm
    • Weight
       2.2 kg
  • SLOT PUNCH
    11 101B
    Punching tool for oval holes 6 x 20 mm as standard.
    • Max. mild steel
      0.8 mm
    • Throat depth
       30 mm
    • Overall length
       340 mm
    • Weight
       2.2 kg
  • PUNCHING TOOL
    13 300
    Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 2 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
       40 mm
    • Overall height
      200 mm
    • Overall width
      50 mm
    • Overall length
       500 mm
    • Weight
      3.5 kg
  • PUNCHING/COUNTERSINKING
    59 203
    Punching and embossing in one operation. Special for Ø 4 and 5 mm pop rivets, or as required.
    • Capability in 1 mm
    • standard mild steel
      Ø 5 mm
    • Overall length
       290 mm
    • Weight
      1.1 kg
  • EDGE SETTER
    61 201
    A useful tool with hand-wearing rubber grips. The increased leverage makes work easier.
    • Max. mild steel
      1 mm
    • Jaw width
       22 mm
    • Bending width
       13 mm
    • Overall length
       285 mm
    • Weight
      1.0 kg
  • EDGE SETTER MINI
    61 504
    For working of small sheet edges - guards - panels - doors - parts etc. Bending tool - a good investment for bodywork repairs. The tool head is designed to enable folds to be made where the plate edges are very small.
    • Max. mild steel
      1 mm
    • Jaw width
       10 mm
    • Overall width
      90 mm
    • Bending width
       13 mm
    • Overall length
       220 mm
    • Weight
      0.9 kg
  • EDGE SETTER
    61 444
    For curves.
    • Max. mild steel
      1 mm
    • Jaw width
       8 mm
    • Bending depth - round jaws
      20 mm
    • Overall length
       230 mm
    • Weight
      0.9 kg
  • FOLDING TOOL
    61 608
    Applicable to edge folding for bodywork welding. The possibility for protection against rust on the underside of the plate is an added advantage.
    • Max. mild steel
      1 mm
    • Jaw width
       18 mm
    • Overall width
      20 mm
    • Overall length
       225 mm
    • Weight
      0.8 kg
  • DOOR SKIN EDGING TOOL
    66 051
    For joining sheets. Applicable for welding or gluing replacement panels on to bodies. A nylon pad prevents deformation of the flange on the outer side of the sheet.
    • Width of nylon pad
      40 mm
    • Overall length
       310 mm
    • Weight
      1.2 kg
  • PLANNISHING TOOL FOR DOORLOCKS
    66 500
    Adjusting tool for vehicle door locks.
    • Jaw width
      10 mm
    • Overall length
       210 mm
    • Weight
      0.9 kg
  • PLANNISHING TOOL FOR DOORLOCKS GOLF III
    66 888
    Adjusting tool for vehicle door locks.
    • Jaw width
      10 mm
    • Overall length
       210 mm
    • Weight
      0.9 kg
  • PNEUMATIC PUNCHER
    63 302
    Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations. An easy and useful puncher for thin plate work.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
      15 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
       240 mm
    • Weight
      1.3 kg
  • PNEUMATIC PUNCHER
    63 805
    A combined tool which can accept two punches of different diameters. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
      12 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
       223 mm
    • Weight
      1.3 kg
  • PNEUMATIC COMBINED BENDING/PUNCHING TOOL
    63 301
    The ideal tool for bodywork component applications. The tool can rotate for optimum working position. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1 mm
    • standard mild steel
      Ø 8 mm
    • Bending capability
      0.8-1 mm
    • Jaw width
      22 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
       240 mm
    • Weight
      1.4 kg
  • PUNCHING TOOL WITH LARGE STROKE
    18 022
    Accurate punch guides enable e.g. oval and square tools to be mounted. Available with punches and dies from Ø 2-10 mm, in 1/10 mm graduations.
    • Capability in 1.75 mm
    • standard mild steel
      Ø 10 mm
    • Throat depth
      50 mm
    • Overall height
      150 mm
    • Overall width
      60 mm
    • Length of stroke
      35 mm
    • Overall length
       550 mm
    • Weight
      4 kg
  • PUNCHING TOOL
    11 210N
    Available with punches and dies from Ø 2-10 mm, in 1/10 mm graduations. Special form punches, e.g. oval and square, also available
    • Capability in 1.5 mm
    • standard mild steel
      Ø 10 mm
    • Throat depth
      40 mm
    • Overall height
      75 mm
    • Overall Width
      30 mm
    • Overall length
       430 mm
    • Weight
      2.2 kg
  • PUNCHING TOOL FOR HEAVY SHEET
    11 102
    The ideal tool for punching holes up to Ø 10 mm. Available with punches and dies from Ø 2-10 mm, in 1/10 mm graduations. Special form punches, e.g. oval and square, also available.
    • Capability in 3 mm
    • standard mild steel
      Ø 10 mm
    • Throat depth
      40 mm
    • Overall height
      160 mm
    • Overall width
      50 mm
    • Punching force
      2,000 kg
    • Overall length
       590 mm
    • Weight
      6 kg
  • PNEUMATIC/HYDRAULIC TOOL
    63 470
    The combined tool head accepts two different punch sizes.
    • Capability in 1.75 mm
    • standard mild steel
      Ø 10 mm
    • Diameter - body
      70 mm
    • Overall length
      400 mm
    • Length of stroke
      7 mm
    • Working pressure
      8 bar
    • Punching force
       1,200 kg
    • Weight
      4 kg
  • PORTABLE PNEUMATIC PUNCHER
    TR 13 101
    As easy and useful puncher for thin sheet work. Available with punches and dies from Ø 2-8 mm, in 1/10 mm graduations.
    • Capability in 1.5 mm
    • standard mild steel
      Ø 8 mm
    • Throat depth
      40 mm
    • Punching force
      800 kg
    • Working pressure
      8 bar
    • Overall length
      320 mm
    • Length of stroke
       10 mm
    • Weight
      4 kg