PUNCHING TOOLS

1. 
   JOGGLER
   61 202

   A useful tool for working car body components. The combined tool can be set for either punching or bending.
   Available with 4-8 mm punches and dies as standard.

   • Capability in 1 mm
   • standard mild steel
     ø 8 mm
   • Throat depth
   • (punching)
     8 mm
   • Jaw width
     22 mm
   • Overall width
     110 mm
   • Bending depth
     13 mm
   • Overall length
     290 mm
   • Weight
     1.2 kg
   
2. 
   PUNCHING TOOL SENIOR
   11 101

   Available with punches and dies from 2-8 mm, in 1/10 mm graduations.

   • Capability in 1.5 mm
   • standard mild steel
     ø 8 mm
   • Throat depth
     40 mm
   • Overall length
     320 mm
   • Weight
     1.8 kg
   
3. 
   PUNCHING TOOL JUNIOR
   21 101

   Available with punches and dies from 2-5 mm, in 1/10 mm graduations.

   • Capability in 1.5 mm
   • standard mild steel
     ø 5 mm
   • Throat depth
     30 mm
   • Overall length
     250 mm
   • Weight
     1 kg
   
4. 
   HAND PUNCH JUNIOR
   B 31 101

   Available with punches and dies from 2-5 mm, in 1/10 mm graduations.

   • Capability in 1 mm
   • standard mild steel
     ø 5 mm
   • Throat depth
     20 mm
   • Overall length
     200 mm
   • Weight
     0.8 kg
   
5. 
   PUNCHING TOOL JUNIOR
   D 31 203

   Available with punches and dies from 2-5 mm, in 1/10 mm graduations.

   • Capability in 1 mm
   • standard mild steel
     ø 5 mm
   • Throat depth
     15 mm
   • Overall length
     170 mm
   • Weight
     0.4 kg
   
6. 
   PUNCHING TOOL OVER FLANGES
   61 502

   For punching of guards.
   Can be supplied with punches and dies from 4-8 mm.

   • Capability in 1 mm
   • standard mild steel
     ø 8 mm
   • Throat depth
     30 mm
   • Overall width
     85 mm
   • Overall length
     300 mm
   • Weight
     1 kg
   
7. 
   PUNCHING TOOL FOR NUMBER PLATES
   TN 11 102-1

   Available with punches and dies from 2-8 mm, in 1/10 mm graduations.

   • Capability in 1.25 mm
   • standard mild steel
     ø 8 mm
   • Throat depth
     60 mm
   • Overall length
     330 mm
   • Weight
     2 kg
   
8. 
   PUNCHING TOOL DOUBLE PUNCH
   63 704

   A combined tool which can accept two punches of different diameters.
   Available with punches and dies from 2-8 mm, in 1/10 mm graduations.
   

   • Capability in 1 mm
   • standard mild steel
     ø 8 mm
   • Throat depth
     15 mm
   • Overall length
     315 mm
   • Weight
     1.4 kg
   
9. 
   SLOT PUNCH
   11 101A

   Punching tool for oval holes
   5 x 12 mm, 6 x 12 mm and
   8 x 12 mm as standard.
   

   • Max. mild steel
     1.5 mm
   • Throat depth
     30 mm
   • Overall length
     430 mm
   • Weight
     2.2 kg
   
10. 
    SLOT PUNCH
    11 101B

    Punching tool for oval holes
    6 x 20 mm as standard.
    

    • Max. mild steel
      0.8 mm
    • Throat depth
      30 mm
    • Overall length
      320 mm
    • Weight
      2.2 kg
    
11. 
    PUNCHING TOOL CURTAIN RAILS
    41 401

    Available with punches and dies from 2-5 mm, in 1/10 mm graduations.
    Specially developed for all profiled aluminium curtain rails.

    • Overall length
      220 mm
    • Weight
      0.9 kg
    
12. 
    PUNCHING/COUNTERSINKING
    59 203

    Punching and embossing in one operation. Special for 4 and 5 mm pop rivets, or as required.

    • Capability in 1 mm
    • standard mild steel
      ø 5 mm
    • Overall length
      290 mm
    • Weight
      1.1 kg
    
13. 
    EDGE SETTER
    61 201

    A useful tool with hand-wearing rubber grips. The increased leverage makes work easier.

    • Max. mild steel
      1 mm
    • Jaw width
      22 mm
    • Bending width
      13 mm
    • Overall length
      300 mm
    • Weight
      1 kg
    
14. 
    EDGE SETTER MINI
    61 504

    For working of small sheet edges - guards - panels - doors - parts etc. Bending tool - a good investment for bodywork repairs.
    The tool head is designed to enable folds to be made where the plate edges are very small.

    • Max. mild steel
      1 mm
    • Jaw width
      10 mm
    • Overall width
      90 mm
    • Bending width
      13 mm
    • Overall length
      220 mm
    • Weight
      0.9 kg
    
15. 
    EDGE SETTER
    61 444

    For curves.

    • Max. mild steel
      1 mm
    • Jaw width
      8 mm
    • Bending depth
    • - round jaws
      20 mm
    • Overall length
      230 mm
    • Weight
      0.9 kg
    
16. 
    FOLDING TOOL
    61 608

    Applicable to edge folding for bodywork welding.
    The possibility for protection against rust on the underside of the plate is an added advantage.

    • Max. mild steel
      1 mm
    • Jaw width
      18 mm
    • Overall width
      20 mm
    • Overall length
      225 mm
    • Weight
      0.8 kg
    
17. 
    DOOR SKIN EDGING TOOL
    66 051

    For joining sheets. Applicable for welding or gluing replacement panels on to bodies.
    A nylon pad prevents deformation of the flange on the outer side of the sheet.

    • Width of nylon pad
      40 mm
    • Overall length
      310 mm
    • Weight
      1.2 kg
    
18. 
    PLANNISHING TOOL FOR DOORLOCKS
    66 500

    Adjusting tool for vehicle door locks.

    • Jaw width
      10 mm
    • Overall length
      210 mm
    • Weight
      0.9 kg
    
19. 
    PLANNISHING TOOL FOR DOORLOCKS GOLF III
    66 888

    Adjusting tool for vehicle door locks.

    • Jaw width
      10 mm
    • Overall length
      210 mm
    • Weight
      0.9 kg
    
20. 
    PNEUMATIC PUNCHER
    63 302

    Available with punches and dies from 2-8 mm, in 1/10 mm graduations.
    An easy and useful puncher for thin plate work.

    • Capability in 1 mm
    • standard mild steel
      ø 8 mm
    • Throat depth
      15 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
      240 mm
    • Weight
      1.3 kg
    
21. 
    PNEUMATIC PUNCHER
    63 805

    A combined tool which can accept two punches of different diameters.
    Available with punches and dies from 2-8 mm, in 1/10 mm graduations.

    • Capability in 1 mm
    • standard mild steel
      ø 8 mm
    • Throat depth
      15 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
      223 mm
    • Weight
      1.3 mm
    
22. 
    PNEUMATIC COMBINED BENDING/PUNCHING TOOL
    63 301

    The ideal tool for bodywork component applications.
    The tool can rotate for optimum working position.
    Available with punches and dies from 4-8 mm as standard.

    • Capability in 1 mm
    • standard mild steel
      ø 8 mm
    • Bending capability
      0.8-1 mm
    • Jaw width
      22 mm
    • Punching force
      550 kg
    • Working pressure
      8 bar
    • Diameter - body
      58 mm
    • Overall length
      240 mm
    • Weight
      1.4 kg
    
23. 
    PUNCHING TOOL WITH LARGE STROKE
    18 022

    Accurate punch guides enable e.g. oval and square tools to be mounted.
    Available with punches and dies from 2-10 mm, in 1/10 mm graduations.

    • Capability in 2.0 mm
    • standard mild steel
      ø 10 mm
    • Throat depth
      50 mm
    • Overall height
      150 mm
    • Overall width
      60 mm
    • Length of stroke
      35 mm
    • Overall length
      550 mm
    • Weight
      4 kg
    
24. 
    PUNCHING TOOL 10 MM DIAMETER
    11 210

    Available with punches and dies from 2-10 mm, in 1/10 mm graduations.
    Special form punches, e.g. oval and square, also available

    • Capability in 1.5 mm
    • standard mild steel
      ø 10 mm
    • Throat depth
      40 mm
    • Overall height
      90 mm
    • Overall width
      50 mm
    • Overall length
      450 mm
    • Weight
      3.5 kg
    
25. 
    PUNCHING TOOL FOR HEAVY SHEET
    11 102

    The ideal tool for punching holes up to ø 10 mm.
    Available with punches and dies from 2-10 mm, in 1/10 mm graduations.
    Special form punches, e.g. oval and square, also available.

    • Capability in 3 mm
    • standard mild steel
      ø 10 mm
    • Throat depth
      40 mm
    • Overall height
      160 mm
    • Overall width
      50 mm
    • Punching force
      2000 kg
    • Overall length
      590 mm
    • Weight
      6 kg
    
26. 
    PNEUMATIC/HYDRAULIC TOOL
    63 470

    The combined tool head accepts two different punch sizes.

    • Capability in 1.75 mm
    • standard mild steel
      ø 10 mm
    • Diameter - body
      70 mm
    • Overall length
      400 mm
    • Weight
      4 kg
    
27. 
    PORTABLE PNEUMATIC PUNCHER
    TR 13 101

    As easy and useful puncher for thin sheet work.
    Available with punches and dies from 2-8 mm, in 1/10 mm graduations.

    • Capability in 1.5 mm
    • standard mild steel
      ø 8 mm
    • Throat depth
      40 mm
    • Punching force
      800 kg
    • Working pressure
      8 bar
    • Overall length
      320 mm
    • Weight
      4 kg
    

1. NEWS
2. New machines for
   holepunching and
   radiusing corners.
3.  
4.